Go to james-heal.co.uk
Submit a Ticket
INSTRUMENTS
INSTRUMENTS
Titan 4, 5 and 10
TruBurst
ThermaPlate
Colour Assessment Cabinets
Sample Cutters
Titan 1 2 3
FlexiBurn
TruFade
ElastAbrasion
Spray Rating Tester
Martindale
Orbitor
GyroWash
Perspirometer
DynaWash & DynaWash Duo
SnagPod
FlexiFrame
CrockMaster
ElmaTear
Impulse
Wascator
ProView
ProMace
AccuDry
Crease Recovery Angle Tester
Apollo
Wrinkle Recovery Tester
Titan
DynaWash
OPERATOR'S GUIDES
Memmert Incubator IN30
GyroWash
CrockMaster
Spray Rating Tester
ElmaTear
Titan
Martindale 900 Series
AquAbrasion 1819
TruFade
Martindale 1600 Series
SnagPod
Perspirometer
Wascator
TruBurst
DynaWash & DynaWash Duo
Orbitor
Crease Recovery Angle Tester
Martindale 1300 Series
Yellowing Test Kit
Tautex
ElastAbrasion
ThermaPlate
FlexiBurn
Incubator / Oven
AccuDry
Martindale model 103
Wrinkle Recovery Tester
Drape Tester
ProMace
Sample Cutters
Sock Abrasion Kit
Impulse
ProView
FlexiFrame
General
INSTALLATION GUIDE
ProDry
WickView
TruRain
AirPro - Air Permeability Tester
TEST MATERIALS
Blue Wool References
Martindale Test Materials
Grey Scales
Photographic Standards
Cotton Lawn / Crocking Cloth
Detergents
Makeweights
Phenolic Yellowing
MultiFibre
Pilling / Snagging
Verification
Paint for CAC
Certificates of Conformity
EU DECLARATION OF CONFORMITY
GyroWash
Orbitor
ElmaTear
CrockMaster
Martindale
TruFade
DynaWash & DynaWash Duo
AccuDry
Impulse
ThermaPlate
WickView
TruRain
AquAbrasion
MATERIAL SAFETY DATA SHEETS
MATERIAL SAFETY DATA SHEETS
GENERAL
Submitting a Ticket
Standards
Statistical Calculations
Filters
TruFade
Back to home
INSTRUMENTS
INSTRUMENTS
Titan 4, 5 and 10
TruBurst
ThermaPlate
Colour Assessment Cabinets
Sample Cutters
Titan 1 2 3
FlexiBurn
TruFade
ElastAbrasion
Spray Rating Tester
Martindale
Orbitor
GyroWash
Perspirometer
DynaWash & DynaWash Duo
SnagPod
FlexiFrame
CrockMaster
ElmaTear
Impulse
Wascator
ProView
ProMace
AccuDry
Crease Recovery Angle Tester
Apollo
Wrinkle Recovery Tester
Titan
DynaWash
OPERATOR'S GUIDES
Memmert Incubator IN30
GyroWash
CrockMaster
Spray Rating Tester
ElmaTear
Titan
Martindale 900 Series
AquAbrasion 1819
TruFade
Martindale 1600 Series
SnagPod
Perspirometer
Wascator
TruBurst
DynaWash & DynaWash Duo
Orbitor
Crease Recovery Angle Tester
Martindale 1300 Series
Yellowing Test Kit
Tautex
ElastAbrasion
ThermaPlate
FlexiBurn
Incubator / Oven
AccuDry
Martindale model 103
Wrinkle Recovery Tester
Drape Tester
ProMace
Sample Cutters
Sock Abrasion Kit
Impulse
ProView
FlexiFrame
General
INSTALLATION GUIDE
ProDry
WickView
TruRain
AirPro - Air Permeability Tester
TEST MATERIALS
Blue Wool References
Martindale Test Materials
Grey Scales
Photographic Standards
Cotton Lawn / Crocking Cloth
Detergents
Makeweights
Phenolic Yellowing
MultiFibre
Pilling / Snagging
Verification
Paint for CAC
Certificates of Conformity
EU DECLARATION OF CONFORMITY
GyroWash
Orbitor
ElmaTear
CrockMaster
Martindale
TruFade
DynaWash & DynaWash Duo
AccuDry
Impulse
ThermaPlate
WickView
TruRain
AquAbrasion
MATERIAL SAFETY DATA SHEETS
MATERIAL SAFETY DATA SHEETS
GENERAL
Submitting a Ticket
Standards
Statistical Calculations
Filters
TruFade
INSTRUMENTS
How do I re-install TestWise in Windows 10?
Titan 4, 5 and 10
TestWise for Titan - How to Manually Update the Custom Configuration
TestWise for Titan - How can you change the graph scales?
Using T27 Pneumatic Grips
Stretch and Recovery Test EN 14704 Knitted Fabric Method B
Finding xml test data files
Which loadcells can be used with Titan model 1710-5 and 1710-10?
T32 - Setting up the T32 Nail Puncture Kit
Adding EN 16732 test procedures to TestWise pre-2017
Which tooling is required for Titan5 & Titan10?
What are the Standards for Button Testing?
Titan Error Codes
Trouser tear test according to ISO 13937-2
Setting or re-setting the Reference Position for T27 Grips
TestWise - New Red Dongle
How to Guide - Setup of T18 Loop Bars
Setting Up the 794-416 Nail Tear Fixture for UNE 40413
Setting up T21 C-Clamps on Titan
Which standards are installed in TestWise 2015 for Titan?
How to set up T38 Dumbbell Grips in TestWise
Which Titan models are compatible with T27 Jaws?
CRE and CRT - what is the difference?
TestWise - How to Add a Company Logo to the Test Report
Seam slippage - the correct mounting of 2 part specimens
Seam slippage - marking and cutting test specimens
Why do we install TestWise 20xx for “Just Me” as opposed to “Everybody” or "All Users" ?
Tearing Tests - Marking and Cutting Test Specimens
TITAN FIXTURES FOR CEN/TR 16792
Sewing Loop Specimens for Stretch & Recovery Testing
Using T27 Pneumatic Grips with Thick Fabrics
What is Break Detection?
TestWise - How to save test files to a network folder
How is seam slippage calculated on Titan 4 and 5?
See more
TruBurst
Which Burst Detection Setting should I use on TruBurst?
TruBurst4 – updating Adidas 4.09 from v2 to v3
Which dome should be used on TruBurst?
Standards, Domes and Diaphragms for TruBurst
What is the purpose of the TruBurst Calibration Plate?
What are the main differences between TruBurst Lite & TruBurst Pro?
How can I check if TruBurst is working correctly between calibrations?
TruBurst - Diaphragm Correction
Why is the top half of the touchscreen not responding on TruBurst 4 1440?
Why is the clamp ring not detected correctly on TruBurst 600?
Why is the TruBurst not detecting the Clamp Ring correctly on the TruBurst 2 810?
Why won't my TruBurst 600 switch on?
Why wont the guard stay up on my TruBurst 4 1440?
Why do I keep getting Data Logger Run Time Error 75 on TruBurst 600?
See more
ThermaPlate
How to use our test materials for ISO 105-X11 on ThermaPlate
How is the correct pressure created on ThermaPlate specimens?
Colour Assessment Cabinets
Which bulbs or lamps can be used in a Colour Assessment Cabinet?
Can I grade pilling and snagging in a Colour Assessment Cabinet (CAC)?
Sample Cutters
How do I change the blades on a specimen cutter?
Which blades are required for the sample cutters?
What are the different size specimen cutters used for?
Is the template specified in ISO 3801 included with a Sample Cutter?
Is the metal plate template specified in ISO 3801 available from James Heal?
See more
Titan 1 2 3
How to Add Columns to Test Report
Creating a "lab" user in Windows 7
FlexiBurn
How to Copy new standards to the Control Module
Which standards can be performed on FlexiBurn?
R118 Regulations & Flexiburn
Is FlexiBurn compliant with EN 13773?
Test Frames and Templates for ISO 15025
Why is the gas not igniting on FlexiBurn 780?
See more
TruFade
What is Nominal Power Mode and Controlled Irradiance Mode ?
How many specimens can TruFade accommodate?
What is the purpose of the KG1 filters inside TruFade?
How to Access the Lamp and Filter Timers (Odometers)
Why are the samples are not rotating (flip-flop mechanism) on the TruFade 200?
See more
ElastAbrasion
What is ElastAbrasion?
How are specimens created for ElastAbrasion?
Spray Rating Tester
Which standards can be performed on the Spray Rating Tester?
How are the results from the Spray Rating Tester assessed?
Martindale
Using the line contact plate on Martindale
Sock Abrasion Kit Mounting Technique
What is a Lissajous?
How to set up for ISO 26082-1 Martindale Soiling Test for Leather
What are Microscratch Reference Plates?
Magnifying Glass and Hole Gauge for ISO 12947-2
How is the rubbing motion altered on a Martindale?
Do I need the assessment mask as specified in ISO 12947-2?
How long is a complete Lissajous pattern?
How are specimens assessed after testing on the Martindale Ball Plate Kit?
What are Martindale rubs, cycles and Lissajous?
How do I set the time on the Martindale 900 Series?
How do I change the sound settings on the Martindale 900 Series?
Why is my Martindale 900 Series is making noise while moving?
How do I change the language on the Martindale 900 Series?
See more
Orbitor
Do the current pilling boxes fit older models of Orbitor or Pilling Tester?
Orbitior M&S 18A Drum Liner & Specimen Preparation Guide
Does SnagPod fit onto all models of Orbitor?
Are James Heal instrument liners ready to use?
Which consumables / test materials are required for Orbitor?
Which standards can be performed on Orbitor?
See more
GyroWash
Is there a safe way to handle GyroWash small pots at high temperatures ≥60°C?
Is GyroWash suitable for dry cleaning testing?
Which standards can be performed on GyroWash?
Perspirometer
Separator Plates for Perspirometer
Why is sodium hydroxide used to correct the pH of both the acid & alkaline solutions in ISO 105-E04 & AATCC TM15?
What are the actual weights of the AATCC and ISO Perspirometer weights?
DynaWash & DynaWash Duo
How do I set DynaWash or Dynawash Duo above 60°C?
SnagPod
Which standards can be performed on SnagPod?
How are SnagPod specimens assessed?
FlexiFrame
Which weights and accessories do I need for stretch fabrics on FlexiFrame?
FlexiFrame and ASTM D3107
Can FlexiFrame be used in place of a Fryma Extension Tester?
Which accessories do I need for FlexiFrame standards?
CrockMaster
Does James Heal supply consumables for standards TL 226 & PV 3906?
What are Crock Blocks for James Heal Crockmeter and Crockmaster?
What are the different loading weights available for CrockMaster?
Can CrockMaster 670/680 be used for ISO 11640?
Why does the CrockMaster 680 stop in the wrong position?
See more
ElmaTear
Checking for friction on ElmaTear
Which standards can be performed on ElmaTear?
Why does ElmaTear2 detect the wrong pendulum during calibration?
Why is the touchscreen not responding correctly on the ElmaTear2 855?
Why is the pendulum is not releasing on ElmaTear 655?
How do I change the pendulum release switches on the ElmaTear 655?
See more
Impulse
Are James Heal instrument liners ready to use?
Can I buy Impulse random tumble pilling tester liners from James Heal?
On Impulse, why is there a delay between starting the test and the air flow starting?
On Impulse, why does air flow display OFF even though I have turned it on?
How do I fit liners in Impulse?
Which liners do I require for each standard performed on Impulse?
Why does the timer start but the motor doesn't run on the Impulse 616?
How do I replace the door seal on the Impulse 616?
Why do I get a 'door open' message when the door is closed on the Impulse 616?
See more
Wascator
Can James Heal supply items specified in ISO 6330:2012?
Why does ISO 6330 mention 2 spin speeds?
Which programmes are fitted as standard on Wascator FOM71 CLS?
What changes have been made to the 2012 version of standard ISO 6330?
Which wash test procedure is ISO 6330?
What is the relationship between ISO 6330 5077 and 3759?
See more
ProView
Which photographic standards are in ProView?
What is the correct viewing angle for ProView?
ProMace
Am I using the correct ProMace balls?
Which standards can be performed on ProMace?
AccuDry
What temperatures should be achieved with AccuDry using ISO 6330?
Does AccuDry comply with AATCC standards?
Which standards can be performed on AccuDry?
Why is my AccuDry2 not reversing?
Why is my AccuDry2 not heating up/getting hot?
Why does AccuDry3 1417 display 'door open' even when the door is closed?
See more
Crease Recovery Angle Tester
Which standards can be performed on the Crease Recovery Angle Tester?
Is the Crease Recovery Angle Tester the same as the Scott Type Crease Flex Abrasion Tester?
Apollo
What are the parameters required to operate the Apollo according to ISO 105-B02:2014?
Why is the lamp not igniting on Apollo 700?
Why do I keep getting Error Message 137 - on Apollo 700 & Apollo 2 800?
How do I install a new Solarsens on the Apollo 2 800?
Why is the humidity too low on my Apollo 2 800?
See more
Wrinkle Recovery Tester
How are results evaluated for the Wrinkle Recovery Tester?
Titan
Why does the Titan 4 110 stop communicating after being left for some time?
Why are my T17 jaws are not aligned correctly on Titan 4 110?
DynaWash
What to do if the drain pump is running but water isn't being drained?
Why is my DynaWash 825 emptying water by itself?