- INSTRUMENTS
- Martindale
-
INSTRUMENTS
- Titan 4, 5 and 10
- TruBurst
- ThermaPlate
- Colour Assessment Cabinets
- Sample Cutters
- Titan 1 2 3
- FlexiBurn
- TruFade
- ElastAbrasion
- Spray Rating Tester
- Martindale
- Orbitor
- GyroWash
- Perspirometer
- DynaWash & DynaWash Duo
- SnagPod
- FlexiFrame
- CrockMaster
- ElmaTear
- Impulse
- Wascator
- ProView
- ProMace
- AccuDry
- Crease Recovery Angle Tester
- Apollo
- Wrinkle Recovery Tester
- Titan
- DynaWash
-
OPERATOR'S GUIDES
- Memmert Incubator IN30
- GyroWash
- CrockMaster
- Spray Rating Tester
- ElmaTear
- Titan
- Martindale 900 Series
- AquAbrasion 1819
- TruFade
- Martindale 1600 Series
- SnagPod
- Perspirometer
- Wascator
- TruBurst
- DynaWash & DynaWash Duo
- Orbitor
- Crease Recovery Angle Tester
- Martindale 1300 Series
- Yellowing Test Kit
- Tautex
- ElastAbrasion
- ThermaPlate
- FlexiBurn
- Incubator / Oven
- AccuDry
- Martindale model 103
- Wrinkle Recovery Tester
- Drape Tester
- ProMace
- Sample Cutters
- Sock Abrasion Kit
- Impulse
- ProView
- FlexiFrame
- General
- INSTALLATION GUIDE
-
TEST MATERIALS
-
EU DECLARATION OF CONFORMITY
-
MATERIAL SAFETY DATA SHEETS
-
GENERAL
-
Filters
Why is my Martindale 900 Series is making noise while moving?
Lubrication will prevent a noisy Martindale, and the recommended greases are Kluberfood NH1 94-6000, or, Kluber Isoflex LDS 18 Special Grease. Full instructions for applying the grease with images and diagrams are included in the PDF document.
Why is my Martindale 900 Series is making noise while moving?
WARNING: Any maintenance work undertaken on a James Heal instrument must be done so by a trained and competent person. Where electrical work is detailed, this should only be completed by a qualified engineer. James Heal is not responsible for damage or injury arising from work carried out by any person not qualified to do so. If in doubt, please contact James Heal or your local James Heal Agent.
